Contact Me

Contact Me


EMail : jimdotdev@gmail.com







Comments

Post a Comment

Popular posts from this blog

Proxmark3 - VM installation Kali Linux

Image
While the Wiki does an excellent step by step installation of the Proxmark, I thought I would write on my experience as I did overlook a step of configuration that lead to some brief confusion.  It should also be noted that there are multiple recommendations made of avoiding installation on a virtual machine, though I was able to accomplish this with no issues. Another note would be that the USB interface used is identified in the picture below. The side USB interface is for powering for standalone or field mode operation in combination with a power source such as a battery pack. Windows 10 If you are running a virtual machine, your host machine needs to have the appropriate driver in order for your device to be accessible to your VM. We must first download and extract the following  https://github.com/Gator96100/ProxSpace/archive/master.zip Once extracted we need to disable driver signature verification. There are two ways to achieve this: Option #1 enable test signing Right ...
Read more

mRemoteNG Managing AnyDesk Connections

Image
Maintaining connections to clients, workstations, and servers over various protocols such as RDP, VNC, SSH, AnyDesk or TeamViewer can be challenging to manage with out the right tool. The tool I found best to manage this is mRemoteNG. As I switched from using TeamViewer for clients, I needed to sort out how to add these connections to my mRemoteNG sites. To get started, we first need to create an External Tool. We do this by clicking Tools - External Tools Select "New" at the top left of the main dialog Under Display Name give it a name to use. File name we are calling PowerShell and for our arguments  we are taking insight from the AnyDesk and mRemoteNG support files and using;  "'%PASSWORD%' | &'C:\Program Files (x86)\AnyDesk\AnyDesk.exe' %USERNAME%'@ad' --with-password" Once this is done, we can create out connection. In our new connection we fill out the information like we normally would with the username and password (minus @ad, we ...
Read more

6j1 Tube Preamp

Image
I was browsing online for a soldering project for my oldest son for Christmas, when I came across this 6J1 Tube Preamp kit. It is intended for RCA, but I was hoping to play with adding 1/4" jacks to run my guitar through it. What is a preamp?  A preamp is an electrical device that takes a weak signal and amplifies it, making a weak signal stronger for further processing. Tube amps have always been said to have a warmer sound over solid-state. The Build The kit comes with all the pieces tossed in a bag with no schematic, however; the board is clearly marked and all you really need to do is sort it all and organize your components. You can use a page like All About Circuit's resistor calculator  to determine the Ohms by colour code bands, or you can switch your multimeter to Ohms and test manually - which is typically quicker. https://www.allaboutcircuits.com/tools/resistor-color-code-calculator/   Note: The board lists the 2.2k and 4.7k as "2k2" and "4k7"  I...
Read more